Ajax MultiTransmitter module for connecting wired alarm to Ajax and managing security via the app
Technical Specification
- Make: Ajax
- Model code: MultiTransmitter
- Power Supply: 110–240 V
- Weight g: 805 g
- Dimensions mm: 196 × 238 × 100
MultiTransmitter is an integration module with 18 wired zones for connecting third-party detectors and devices to the Ajax security system. Supports NC, NO, EOL, 2EOL, and 3EOL devices. MultiTransmitter is equipped with two tampers that protect against enclosure opening and detaching from the surface. The device is powered from the 110–240 V~ mains and can also run on a 12 V⎓ backup battery. It can supply 12 V⎓ power to connected detectors. MultiTransmitter is designed for integrating third-party wired detectors and devices into the Ajax security system. The integration module receives information about alarms, events and malfunctions from detectors and devices via a wired connection. Then the integration module transmits the event to the hub using Jeweller radio protocol. The hub sends notifications to users and the security company's Central Monitoring Station (CMS). MultiTransmitter can be used to integrate panic and medical alert buttons, indoor and outdoor motion detectors, opening, vibration, glass breaking, gas, fire detectors, etc. The device type is indicated in the zone's settings to which the wired detector/device is connected. A total of 7 types of events are available for the devices connected to MultiTransmitter:- Tamper- Intrusion- Fire- Medical help- Panic button- Gas (gas concentration alarm)- Malfunction MultiTransmitter has 18 wired zones. Multiple devices can be connected to one zone. The number of connected devices depends on their power consumption. The total maximum consumption of the devices or detectors connected to all zones is 1 A. The integration module has three power supply lines of 12 V⎓: one separated line for fire detectors and two lines for other devices. Supported connection types:- NO (normally open).- NC (normally closed).- EOL (connection with one resistor).- 2EOL (connection with two resistors).- 3EOL (connection with three resistors). In the Ajax app, you can select the normal state (NC or NO) for each terminal pair: panic button, tamper, and malfunction. This allows connecting to MultiTransmitter any detector with potential-free contacts, regardless of its configuration.
Read moreMake | Ajax |
---|---|
Manufacturer | Ajax Systems |
Category | Intruder Alarms>Intruder alarm communicators |
Model code | MultiTransmitter |
Electrical Specifications | Power Supply: 110–240 V |
Physical Specifications |
Weight g: 805 g Dimensions mm: 196 × 238 × 100 |
Environmental Specifications |
Operating Temp oC: -10 ~ +40 C (14 ~ 104 F) Operating Humidity %: Up to 75% |
Additional info |
MultiTransmitter is an integration module with 18 wired zones for connecting third-party detectors and devices to the Ajax security system. Supports NC, NO, EOL, 2EOL, and 3EOL devices. MultiTransmitter is equipped with two tampers that protect against enclosure opening and detaching from the surface. The device is powered from the 110–240 V~ mains and can also run on a 12 V⎓ backup battery. It can supply 12 V⎓ power to connected detectors. MultiTransmitter is designed for integrating third-party wired detectors and devices into the Ajax security system. The integration module receives information about alarms, events and malfunctions from detectors and devices via a wired connection. Then the integration module transmits the event to the hub using Jeweller radio protocol. The hub sends notifications to users and the security company's Central Monitoring Station (CMS). MultiTransmitter can be used to integrate panic and medical alert buttons, indoor and outdoor motion detectors, opening, vibration, glass breaking, gas, fire detectors, etc. The device type is indicated in the zone's settings to which the wired detector/device is connected. A total of 7 types of events are available for the devices connected to MultiTransmitter: MultiTransmitter has 18 wired zones. Multiple devices can be connected to one zone. The number of connected devices depends on their power consumption. The total maximum consumption of the devices or detectors connected to all zones is 1 A. The integration module has three power supply lines of 12 V⎓: one separated line for fire detectors and two lines for other devices. Supported connection types: In the Ajax app, you can select the normal state (NC or NO) for each terminal pair: panic button, tamper, and malfunction. This allows connecting to MultiTransmitter any detector with potential-free contacts, regardless of its configuration. |
Download PDF version Download PDF version |
Related Whitepapers
Exploring new vertical markets for professional security systems
Preparing your organisation with quality situational awareness
The key to unlocking K12 school safety grants
DownloadHoneywell GARD USB threat report 2024
DownloadThe truth behind 9 mobile access myths
Download5 surprising findings from OT vulnerability assessments
DownloadPhysical access control
Download