Ajax MotionCam Outdoor (PhOD) wireless outdoor motion detector with a photo camera to verify alarms

• Make: Ajax
• Model code: MotionCam Outdoor (PhOD)
• PIR Detectors: Yes
• Coverage/ Range m: 3 ~ 15
• Angle of Detection ^o: PIR sensor: Horizontal — 90° ; Camera: Horizontal — 105° ,Vertical — 50°

When the system is armed, the detector continuously receives signals from two PIR sensors. If both sensors detect identical motion, MotionCam Outdoor (PhOD) instantly transmits an alarm signal to the hub and confirms it with an animated series of photos. Hub activates the sirens connected to the system, triggers scenarios, notifies users and the security company. Users know exactly where motion is detected. The notifications contain the name of the hub (name of the secure facility), the name of the device, and the virtual room to which the detector is assigned. MotionCam Outdoor (PhOD) is equipped with two independent PIR sensors, the signals of which are analyzed by a two-step LISA algorithm. When both sensors detect motion, LISA performs correlation and spectral analysis of the signals to instantly separate the real threats and the interferences. The device automatically increases or decreases the sensor sensitivity in order to accurately detect motion in the heat and cold. Visual verification helps to instantly ascertain the situation, saving users from concerns and security companies from unnecessary patrol dispatches. Photo verification allows you to receive visual confirmation of MotionCam Outdoor (PhOD) and Ajax fire detectors alarms. The Photo on Demand feature allows requesting a photo from the detector at any time to find out the situation at the facility. Combining the best optics, fast processor and advanced software algorithms, MotionCam Outdoor (PhOD) takes informative pictures in any weather, day or night. The built-in MotionCam Outdoor (PhOD) camera can take 1 to 5 images with a resolution of 320 × 176 pixels and up to 3 images with a resolution of 640 × 352 pixels. The detector has infrared illumination for shooting in the dark. MotionCam Outdoor (PhOD) can not be unnoticeably disabled even if the system is disarmed. The detector is equipped with masking sensors reacting to hindering, covering and painting the lens. It will take the hub less than a minute to detect the loss of communication with the detector and inform a central monitoring station and users about the problem. The fact that MotionCam Outdoor (PhOD) was dismantled will become known instantly. The built-in tamper alarms if the dust- and moisture-proof detector body is opened.